FAR – Defender Cubby box safe – Sliding top

£185.00£240.00 inc. VAT

Clear
 

Description

SLIDING TOP IS NOT COMPATIBLE WITH DEFENDER 90 VEHICLES.

The FAR cubby box safe is available in two main configurations, both of which are designed to fit under a cubby box between the front two seats in a Land Rover Defender. The unit has a lock located on the front which can either be a standard lock or a wing-handle lock. Locking pieces inside the unit are stainless steel for durability.

There are two base configurations to choose from, one (standard depth) which sits above the seatbox floor and provides x mm height storage. The second configuration is our deep version which has a centre section which drops below the seatbox floor to give another x mm of storage. Full storage dimensions are at the bottom of this page.

The unit takes the standard cubby box and raises it to a more comfortable position for your arm while driving, the front of the safe is the same profile as the front of the cubby box before it is lifted so there is no issue with either gear or transfer box shifter.
The cubby box is shunted backwards which again allows access to transfer box lever without any issues…..but also gives you a location for switches, sockets, gauges in a removable plate, which can be customized or we have some pre-configured plates to order which are shown below.
On the rear you have another removable panel which again can be customized or we have some pre-configured plates to order which are shown below.

If you want a custom plate from either the front, rear or both then simply select custom plate from the drop down list when ordering and we’ll be in touch to discuss. We have some printable templates that we will send to you which can be scribbled on and sent back, we’ll then draw these up and send you a drawing for approval before we proceed. Allow upto a week for custom plates although in most cases we can add them to an existing cut job and get them turned around quicker.


Supplied with all stainless fixings, your choice of front and rear plates and either a regular lock or a wing-handle lock.

DEPTH OPTIONS

Standard depth, sits above seatbox.

Extra deep, centre section sits below seatbox for extra storage.

 

LOCK OPTIONS

Standard lock

Wing-handle lock

 

 

FRONT PLATE OPTIONS

Front Plate A – Blank

Front Plate B – 1 Carling switch directly fits into panel

Front Plate C – 2 Carling switches directly fit into panel

Front Plate D – 1 x 12v socket (or similar such as dual usb socket)

Front Plate E – 2 x 12v socket (or similar such as dual usb socket)

Front Plate F – 1 Carling switch direct fit and 1 x 12v socket (or similar such as dual usb socket)

 

 

REAR PLATE OPTIONS

FAR CUBBY PLATE A

Rear Plate A – 1 Carling switch in an individual mount and 1 12v socket (or similar such as dual usb socket)

FAR CUBBY PLATE B

Rear Plate B – 2 Carling switch in individual mounts and 2 12v sockets (or similar such as dual usb socket) – The right hand 12v socket location on this has been brought in towards the centre of the plate to make using the transfer box lever easy to use in TDCI (Puma) Defenders

FAR CUBBY PLATE C

Rear Plate C – 3 Carling switch in individual mounts and 2 12v sockets (or similar such as dual usb socket) – The right hand 12v socket location on this has been brought in towards the centre of the plate to make using the transfer box lever easy to use in TDCI (Puma) Defenders

FAR CUBBY PLATE D

Rear Plate D – 2 12v sockets (or similar such as dual usb socket) – This plate is popular as a rear plate in 110/130 vehicles with two row’s of seats and also 90 station wagon’s to provide power and/or USB charging to rear passengers

FAR CUBBY PLATE E

Rear Plate E – 2 Carling switch in individual mounts and 2 12v sockets (or similar such as dual usb socket) – This plate is popular as a rear plate in 110/130 vehicles with two row’s of seats and also 90 station wagon’s to provide switches, power and/or USB charging to rear passengers.

 

Additional information

Depth

Standard (above seatbox), Extra deep (above and below seatbox)

Lock

Standard, Wing-handle

Front Plate 1

Custom (Use drop down below to order custom plates), Plate A, Plate B, Plate C, Plate D, Plate E, Plate F

Front Plate 2

Custom (Use drop down below to order custom plates), Plate A, Plate B, Plate C, Plate D, Plate E, Plate F

Rear Plate

Custom (Use drop down below to order custom plates), Plate A, Plate B, Plate C, Plate D, Plate E, Plate F

Custom Plates

None, 1 Custom Plate, 2 Custom Plates, 3 Custom Plates